IPv6 simple RIP routing

April 25, 2007 at 11:32 am | Posted in IPv6 | Leave a comment

PE1#
!
ipv6 unicast-routing
!
!
interface FastEthernet0/0
 no ip address
 speed 10
 full-duplex
 ipv6 address FEC0::/64 eui-64
 ipv6 address FEC0:0:0:1::/64 eui-64
 ipv6 address FEC0:0:0:2::/64 eui-64
 ipv6 enable
 ipv6 rip attlab enable
!        

ipv6 router rip attlab
  no split-horizon
!
!

P1#
!
ipv6 unicast-routing
!
!
interface FastEthernet0/0
 no ip address
 speed 10
 full-duplex
 ipv6 address FEC0::/64 eui-64
 ipv6 address FEC0:0:0:2::/64 eui-64
 ipv6 address FEC0:0:0:3::/64 eui-64
 ipv6 enable
 ipv6 rip attlab enable
!        

ipv6 router rip attlab
  no split-horizon
!

PE1#sh ipv6 int fa0/0
FastEthernet0/0 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::20B:5FFF:FE76:7280
  Global unicast address(es):
    FEC0::20B:5FFF:FE76:7280, subnet is FEC0::/64
    FEC0::1:20B:5FFF:FE76:7280, subnet is FEC0:0:0:1::/64
    FEC0::2:20B:5FFF:FE76:7280, subnet is FEC0:0:0:2::/64
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::9
    FF02::1:FF76:7280
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  ND advertised reachable time is 0 milliseconds
  ND advertised retransmit interval is 0 milliseconds
  ND router advertisements are sent every 200 seconds
  ND router advertisements live for 1800 seconds
  Hosts use stateless autoconfig for addresses.
PE1#sh ipv
PE1#sh ipv6 route
IPv6 Routing Table – 9 entries
Codes: C – Connected, L – Local, S – Static, R – RIP, B – BGP
       U – Per-user Static route
       I1 – ISIS L1, I2 – ISIS L2, IA – ISIS interarea
L   FE80::/10 [0/0]
     via ::, Null0
L   FEC0::20B:5FFF:FE76:7280/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0::/64 [0/0]
     via ::, FastEthernet0/0
L   FEC0::1:20B:5FFF:FE76:7280/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0:0:0:1::/64 [0/0]
     via ::, FastEthernet0/0
L   FEC0::2:20B:5FFF:FE76:7280/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0:0:0:2::/64 [0/0]
     via ::, FastEthernet0/0
R   FEC0:0:0:3::/64 [120/2]
     via FE80::20B:5FFF:FE63:1620, FastEthernet0/0
L   FF00::/8 [0/0]
     via ::, Null0

P1#sh ipv6 int fa0/0
FastEthernet0/0 is up, line protocol is up
  IPv6 is enabled, link-local address is FE80::20B:5FFF:FE63:1620
  Global unicast address(es):
    FEC0::20B:5FFF:FE63:1620, subnet is FEC0::/64
    FEC0::2:20B:5FFF:FE63:1620, subnet is FEC0:0:0:2::/64
    FEC0::3:20B:5FFF:FE63:1620, subnet is FEC0:0:0:3::/64
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::9
    FF02::1:FF63:1620
  MTU is 1500 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  ND advertised reachable time is 0 milliseconds
  ND advertised retransmit interval is 0 milliseconds
  ND router advertisements are sent every 200 seconds
  ND router advertisements live for 1800 seconds
  Hosts use stateless autoconfig for addresses.
P1#sh ipv6 route
IPv6 Routing Table – 9 entries
Codes: C – Connected, L – Local, S – Static, R – RIP, B – BGP
       U – Per-user Static route
       I1 – ISIS L1, I2 – ISIS L2, IA – ISIS interarea
L   FE80::/10 [0/0]
     via ::, Null0
L   FEC0::20B:5FFF:FE63:1620/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0::/64 [0/0]
     via ::, FastEthernet0/0
R   FEC0:0:0:1::/64 [120/2]
     via FE80::20B:5FFF:FE76:7280, FastEthernet0/0
L   FEC0::2:20B:5FFF:FE63:1620/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0:0:0:2::/64 [0/0]
     via ::, FastEthernet0/0
L   FEC0::3:20B:5FFF:FE63:1620/128 [0/0]
     via ::, FastEthernet0/0
C   FEC0:0:0:3::/64 [0/0]
     via ::, FastEthernet0/0
L   FF00::/8 [0/0]
     via ::, Null0

Advertisements

Leave a Comment »

RSS feed for comments on this post. TrackBack URI

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Blog at WordPress.com.
Entries and comments feeds.

%d bloggers like this: