System message logging

October 26, 2008 at 10:41 am | Posted in System Management | Leave a comment

IEWB1 Vol5 Task12.2

Enable system message logging on R6 as follows:
o Both routers should save debugging messages to their internal buffers up to 8192 bytes.
o Debugging messages should be sent to the router consoles, but limited to 1 message per second.
o Console log messages should not interrupt other command output.
o Users logged via telnet should only see informational level messages and above.

Configuration

logging on ! on by default
logging buffered 8192 debugging
logging console debugging
logging rate-limit console all 1
logging monitor informational

! this command specifies the default logging level for all destinations, unless otherwise specified e.g. logging console debugging.

line con 0
 logging synchronous
line vty 0 4
 logging synchronous
Advertisements

Leave a Comment »

RSS feed for comments on this post. TrackBack URI

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Create a free website or blog at WordPress.com.
Entries and comments feeds.

%d bloggers like this: